The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard. This recall involves Scout model Retrospec kid's bike helmets in sizes XS and S. The helmets were sold in the following colors and designs: Blippi, Blush, Brash Blue, Chameleon, Cool Mint, Matte Forest Green, Matte Black, Matte Navy, Matte White, Matte Burnt Orange, Matte Green, Matte Royal Blue, and Matte Whisper Pink. The helmets were sold with a green hang tag label listing the name "Retrospec," the Scout brand name, and the helmet size. The word Retrospec or the Retrospec "R" logo appears on the right side of the helmet.
Jan 11, 2024
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard. This recall expansion includes certain units manufactured between January 2019 and February 2020 that were incorrectly marked. DCT recently discovered that a limited number of evaporator coils that were manufactured during that time frame were incorrectly marked with a 2018 serial number, indicating that the unit was manufactured in 2018. The recall scope now includes about 3,600 additional units with the following configurations and coil serial numbers, as shown in the table below: Type Coil Configuration Affected Furnace Brands Affected Coil Serial Numbers Dates Sold Condensing furnace system Up-Flow (Coil above Furnace) All Prefixes ranging from 1901 through 2101 and certain prefixes ranging from 1811-1812 Jan. 2019 through Nov. 2021 Non-condensing furnace system (Certain configurations) Up-Flow (Coil above Furnace) Any "competitor" brand (excludes Goodman, Daikin or Amana branded furnaces) Prefixes ranging from 1901 through 2101 and certain prefixes ranging from 1811-1812 Jan. 2019 through Nov. 2021. NOTE: Furnace systems that were repaired with a new evaporator coil drain pan between January 2019 and November 2021, with the serial number range listed above, are also included in this recall. Whether a non-condensing furnace system falls within the scope of the recall depends on the location of the burners, which, if unknown, can be verified through DCT's model verification tool at: https://www.recallrtr.com/drainpan. Affected units can be identified through serial numbers found on the evaporator coil or the case, which sits atop the vertically installed furnace. The furnace brand and model number can be found on the furnace on the "Energy Guide" label. Consumers can refer to the instructions on Goodman's model verification tool at: https://www.recallrtr.com/drainpan. The model number of the outdoor condenser may also be required and can be found on a label attached to the product.
Daikin Comfort Technologies Manufacturing L.P. (f/k/a Goodman Manufacturing Company L.P.) of Houston, Texas Jan 11, 2024
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard. This recall expands the scope of a previous recall that involved certain evaporator coil drain pans installed with condensing gas furnaces in an up-flow coil configuration. The recall now also includes those drain pans installed with certain configurations of competitor branded (not Goodman, Daikin or Amana-branded) non-condensing residential gas furnaces in a vertical, or "up-flow," coil configuration, as shown in the table below: Type Coil Configuration Affected Furnace Brands Affected Coil Serial Numbers Dates Sold Condensing furnace system Up-Flow (Coil above Furnace) All Prefixes ranging from 1901 through 2101 Jan. 2019 through Nov. 2021 Non-condensing furnace system (Certain configurations) Up-Flow (Coil above Furnace) Any "competitor" brand (excludes Goodman, Daikin or Amana branded furnaces) Prefixes ranging from 1901 through 2101 Jan. 2019 through Nov. 2021 NOTE: Furnace systems that were repaired with a new evaporator coil drain pan between January 2019 and November 2021, with the serial number range listed above, are also included in this recall. Whether a non-condensing furnace system falls within the scope of the expanded recall depends on the location of the burners, which, if unknown, can be verified through DCT's model verification tool at: https://www.recallrtr.com/drainpan. Affected units can be identified through serial numbers found on the evaporator coil or the case, which sits atop the vertically installed furnace. The furnace brand and model number can be found on the furnace on the "Energy Guide" label. Consumers can refer to the instructions on DCT's model verification tool at: https://www.recallrtr.com/drainpan. The model number of the outdoor condenser may also be required and can be found on a label attached to the product.
Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas Jul 28, 2022